Product Description
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save
1.Less Fuel and Less Emission
2.EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
  1.Less Fuel and Less Emission
2.EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Save
It works based OBD2 protocols as remaping the Car's computer ECU.   After driving 200 km road total, EcoOBD2 adjusts itself to the car,   according to the drivers' habits and always keeps remaping the ECU to   save fuel lower and immission.
  What does EcoOBD2 make?
  According to your driving habits,  EcoOBD2 makes new map in the   car's computer ECU for the vehicle's lower fuel consumption. As you   driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to   match your car perfectly for more fuel saving.
  What is EcoOBD2 Chip Tuning Box?
  EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2   connector of your car to decrease the fuel consumption of your car. When   it plugged into OBD2 connector, EcoOBD2 receives the information from   the car computer ECU. With the received data from ECU, EcoOBD2 adjusts   the boost pressure, quantity of fuel, injection timing and pressure to   decrease the fuel consumption of your car.
  EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
  EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
  EcoOBD2 does not change any of the settings permanently. To turn   back to the car's original settings, just unplug EcoOBD2 from OBD2   connector.
  EcoOBD2 help you save fuel consumption:
  - Up to 15% fuel savings
  EcoOBD2 is very easy to use
  Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition   on for 30 seconds. And Turn the engine on. EcoOBD2 settings are optimal   and the best for your car. Even the parameters are different for each   vehicle, there might not be a need to make an additional adjustment.
  EcoOBD2 will recognize your vehicle and your driving habits after   around 200 km/150 miles driving, and then EcoOBD2 adjusts itself to   match your car perfectly.
  EcoOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.
  The main difference between EcoOBD2 Chip Tuning Box and Remapping   tuning methods is that EcoOBD2 Chip Tuning Box is easily removable, and   after unplug you go back to the factory settings. EcoOBD2 is the cheap   and safe type of tuning. Remapping is a permanent change to your car.   This is the expensive tuning and you cannot remove it. EcoOBD2 is   equipped with the engine protection function and 100% safe for your car   engine. EcoOBD2 produced on the printed circuit board in SMD technology.   EcoOBD2 Chip Tuning Boxes are high quality.
  EcoOBD2 Installation and Calibration
  1 - Pull the Car Key out from the ignition.
  2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
  3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
  4 - Press the reset buttom for about 5 sec. After releasing the   buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate   and establish connection with ECU)
  5 - Start up the engine.
  6 - EcoOBD2 will recognize your vehicle and your driving habits,   after around 200 km/150 miles driving and thus EcoOBD2 will adjust   itself to match your car perfectly for more fuel saving.
  Does your car have OBD2 connector?
  On-Board Diagnostics, or "OBD," is a computer-based system built   into all 1996 and later light-duty vehicles and trucks, as required by   the Clean Air Act Amendments of 1990. OBD systems are designed to   monitor the performance of some of an engine's major components   including those responsible for controlling emissions.
  OBD2 necessarily for cars:
  - Sold after January 1, 1996 in the USA
  - Sold after January 1, 2001 in the European Union
  - With gasoline engine sold after January 1, 2003
  Where located OBD2 connector in your car?
  1 Driver's side, underneath dasboard, in the area under the steering column,
  2 Driver's side, underneath dasboard,between the driver-side door and steering column area
  3 Driver's side, underneath dasboard, between the steering column area and the center console
  4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
  5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
  6 Center console, vertical surface  left of vehicle centerline
  7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
  8 Center console, horizontal surface  in front passenger area.
   Certificates : CE / FCC /  RoHS
   2 Year Warranty
  Package including:
  1pc x EcoOBD2 Chip Tuning Box Interface
1pc x User Manuel English 
                           
        